BMS-HOSxP Community
HOSxP => แจ้งปัญหา / ขอความช่วยเหลือ => ข้อความที่เริ่มโดย: mslangu ที่ มีนาคม 20, 2011, 14:19:19 PM
-
วันนี้เป็นวันอาทิตย์ครับการใช้งานเครื่องที่เข้าใช้ HOSxP นั้นมีจำนวนแค่ 12 เครื่อง ในความเป็นจริงไม่น่าจะช้า เพราะเครื่องที่ใช้งานมีน้อยเมื่อเทียบกับวัน จ.- ศ. ที่มีจำนวนเครื่องในการใช้งานเยอะพอสมควรประมาณ จึงขอช่วยท่านอาจารย์วิเคราะห์หน่อยครับ เพราะเครื่องที่ห้อง ER รวมถึงห้องบัตรและจุดอื่นๆด้วย ใช้งานช้าจะลงหัถการต้องรอกว่าจะขึ้นมาแต่ละอย่างครับ เหตุการณ์เกิดมาช่วงบ่ายโมงเริ่มช้าครับ และผมได้แนบไฟล์รูปกราฟHOSxP และไฟล์ My.cnf มาด้วยครับ
-
สเปค Server IBM Intel Xeon Quad-Core E5504 2.0GHz, 4MB L3 Cache RAM 4 GB HD SAS 15K 147GBx2 Raid 1 CentOS 5.4-64 bit HoSxP v.3.54.2.2 ลักษณะเครือข่ายเบื้องต้น จาก server เชื่อมต่อไปยัง switch หนึ่งตัว และจาก switch ตัวนี้ ก็เชื่อมต่อไปยัง switch อีก 3 ตัว แล้วกระจายไปยังเครื่องให้บริการตามหน่วยงานต่างๆ และถ้าหน่วยงานใดมีเครื่องใช้มากกว่าหนึ่งเครื่องก็จะมี switch ที่หน่วยงานนั้นอีกหนึ่งตัว หรือบางหน่วยงานก็เป็นสายตรงจาก switch ทั้ง 4 ตัวข้างต้น ซึ่งswitchที่หน่วยงานส่วนใหญ่เป็น 4 port 8 port บ้างบางจุดครับ
switch ที่ใช้งาน หลักทั้ง 4 ตัว มีของ cisco 3 ตัว และ D-Link 1 ตัวครับเป็นแบบ 24 port ส่วน switch ตัวที่หน่วยงาน ก็ D-Link บ้าง 3-com บ้าง เป้นต้นครับ ขอบคุณมากครับ สอบถามรายละเอียดมาได้นะครับ
-
เคยเจอแบบนี้เหมือนกันครับ นอกเวลาราชการเครื่องที่ใช้งานประมาณ 10 เครื่อง เกิดหลังจากระบบไฟฟ้าในโรงพยาบาลขัดข้อง Switch บางตัว Hang ก็เลยถอดปลั๊กเสียบใหม่ ไม่ถึง 5 นาทีกลับเข้าสู่ภาวะปกติครับ ตอนนี้ก็เลยต้องขอซื้อ Online UPS และ Interactive UPS เพื่อใช้กับ Server และ Switch เพราะตอนนี้ที่ใช้อยู่เป็นแบบ Standby UPS ทั้งนั้นเลยครับ
-
ระบบ HUB เป็น 100M หรือ 1000M
-
มีทั้ง 100 และ 1000 ครับผม
-
เอาเท่าที่ผมรู้นะครับ รออาจารย์ท่านอื่นมาต่อ
# Example MySQL config file for large systems.
#
# This is for a large system with memory = 512M where the system runs mainly
# MySQL.
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /var/lib/mysql) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /var/lib/mysql/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port = 3306
socket = /var/lib/mysql/mysql.sock
skip-locking
innodb_locks_unsafe_for_binlog = 1
#innodb_thread_concurency = 2
innodb_flush_log_at_trx_commit = 2
innodb_doublewrite = 0
innodb_support_xa = 0
innodb_buffer_pool_size = 2000M
innodb_flush_method=O_DIRECT
innodb_open_files = 2000
innodb_lock_wait_timeout = 50
key_buffer_size = 1000M ---> 256M
concurrent_insert = 2
max_heap_table_size = 256M
max_allowed_packet = 256M
table_open_cache = 256
sort_buffer_size = 1M
read_buffer_size = 1M
read_rnd_buffer_size = 4M ---> 1M
join_buffer_size=2M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size= 16M ---> 256M
innodb_file_per_table
max_connections=1000 ---> 500
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 8
log_bin_trust_function_creators=1
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
# binary logging format - mixed recommended
binlog_format=mixed
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/lib/mysql/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /var/lib/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 256M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 64M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[myisamchk]
key_buffer_size = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
-
ขอบคุณอาจารย์ทุกท่านมากครับ ตอนนี้ลองรีสตาร์ทserverและถอดปลั๊กswitch ทุกตัวครับ ก็ดีขึ้นมานิดหน่อยครับ แต่ระยะยาวจะแก้ไขอย่างไรดีครับ รูปกราฟนะตอนที่เซฟมียูเซอร์ออนไลน์ 33 คนครับ
-
ลองใช้การต่อแบบทอดเดียวลองดูนะครับว่ามันจะเร็วขึ้นไหมถ้าเร็วคงเป็นกับสวิต..ถ้าช้าเหมือนเดิมก็แก้ที่server แล้วหล่ะครับ...เหอะๆ..ช่วงนี้อากาศเริ่มร้อน..สวิตมันชอบ...ป่วงๆๆ...ของผมก็เริ่มเป็นแล้วครับ...เหอะๆ..เพราะหลายทอดเหมือนกัน..ครับ.. ;D
-
ขอบคุณอาจารย์ทุกท่านมากครับ ตอนนี้ลองรีสตาร์ทserverและถอดปลั๊กswitch ทุกตัวครับ ก็ดีขึ้นมานิดหน่อยครับ แต่ระยะยาวจะแก้ไขอย่างไรดีครับ รูปกราฟนะตอนที่เซฟมียูเซอร์ออนไลน์ 33 คนครับ
ลองแก้ my.cnf แล้ว restart mysql ดูครับ เพราะมีบางค่า เช่น key_buffer_size มันสูงเกินไป ซึ่งจะเป็นการจอง ram โดยไม่ค่อยจำเป็น
ปล.อย่าลืม backup my.cnf ของเดิมไว้ก่อนแก้นะครับ
-
จะลองปรับ My.cnf ดูครับ แต่ตอนนี้คนไข้รอตรึมเลย ขอบคุณอาจารย์มากครับ ถ้าปรับแล้วจะมาโพสต์ให้ดูครับผม
-
innodb_open_files = 2000
ปรับเป็น
innodb_open_files = 5000
max_allowed_packet = 16M
ปรับเป็น
max_allowed_packet = 512M
มีทั้ง 100 และ 1000 ครับผม
ปรับให้เป็น 1000 ทั้งหมด